- Liminal Studio Slow Render
- Plan of the Slow Render
- Digital Twin of The Physical Installation
- Hardware Interface For Overthinking Architects
- Software Interface For Overthinking Architects
- Rhino Command Logs
- Rhino Crash Logs
- Seminar Archive
- Refrence Library
2025-11-11 21:02:33 512 block instances added to selection.
2025-11-11 21:02:33 Command: _Copy
2025-11-11 21:02:33 2 edges, 3 surfaces added to selection.
2025-11-11 21:02:33 4 edges, 1 surface, 4 vertices added to selection.
2025-11-11 21:02:33 Command: M
2025-11-11 21:02:33 Command: _Move
2025-11-11 21:02:33 1 surface added to selection.
2025-11-11 21:02:33 Command: ZS
2025-11-11 21:02:33 Command: '_Zoom
2025-11-11 21:02:33 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:02:33 Command: ZS
2025-11-11 21:02:33 Command: '_Zoom
2025-11-11 21:02:33 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:02:33 Command: _Delete
2025-11-11 21:02:33 Deleted 1 object.
2025-11-11 21:02:33 Processing light table
2025-11-11 21:02:33 Processing geometry table
2025-11-11 21:02:33 Render setup failed:Cancel
2025-11-11 21:02:33 1 surface added to selection.
2025-11-11 21:02:33 Command: ZS
2025-11-11 21:02:33 Command: '_Zoom
2025-11-11 21:02:33 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:02:33 Command: ZS
2025-11-11 21:02:33 Command: '_Zoom
2025-11-11 21:02:33 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:02:33 Command: ZS
2025-11-11 21:02:33 Command: '_Zoom
2025-11-11 21:02:33 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:02:33 Undoing GumballTransform
2025-11-11 21:02:33 Command: ZS
2025-11-11 21:02:33 Command: '_Zoom
2025-11-11 21:02:33 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:02:33 Command: ZS
2025-11-11 21:02:33 Command: '_Zoom
2025-11-11 21:02:33 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:02:33 Deleted 1 object.
2025-11-11 21:02:33 Processing light table
2025-11-11 21:02:33 Processing geometry table
2025-11-11 21:02:33 Rendering time: 0d 0h 20m 21s
2025-11-11 21:02:33 1024 block instances added to selection.
2025-11-11 21:02:33 Command: _Delete
2025-11-11 21:02:33 Deleted 1024 objects.
2025-11-11 21:02:33 1 edge added to selection.
2025-11-11 21:02:33 Undoing Delete
2025-11-11 21:02:33 4 edges, 1 surface, 4 vertices added to selection.
2025-11-11 21:02:33 Command: M
2025-11-11 21:02:33 Command: _Move
2025-11-11 21:02:33 1024 block instances added to selection.
2025-11-11 21:02:33 Command: _Delete
2025-11-11 21:02:33 Deleted 1024 objects.
2025-11-11 21:02:33 40 block instances added to selection.
2025-11-11 21:02:33 Block Editing part "Light"
2025-11-11 21:02:33 3 polysurfaces, 5 extrusions added to selection.
2025-11-11 21:02:33 Command: ZS
2025-11-11 21:02:33 Command: '_Zoom
2025-11-11 21:02:33 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:02:33 Command: '_SetDisplayMode
2025-11-11 21:02:33 Select a display mode ( Viewport=Active Mode=Shaded )_Wireframe
2025-11-11 21:02:33 Display mode set to "Wireframe".
2025-11-11 21:02:33 8 surfaces, 18 edges, 12 vertices added to selection.
2025-11-11 21:02:33 1 edge, 2 vertices removed from selection.
2025-11-11 21:02:33 21 edges, 8 surfaces, 18 vertices added to selection.
2025-11-11 21:02:33 4 edges, 8 vertices removed from selection.
2025-11-11 21:02:33 Undoing GumballTransform
2025-11-11 21:02:33 Command: _Scale1D
2025-11-11 21:02:33 Undoing Block edit
2025-11-11 21:02:33 Undoing Layer - change visibility
2025-11-11 21:02:33 Undoing Delete
2025-11-11 21:02:33 Undoing Move
2025-11-11 21:02:33 Command: _-ScriptEditor
2025-11-11 21:02:33 Select Option ( Edit Run Open )E
2025-11-11 21:02:33 Log file for today will be: /Users/tianrunli/Desktop/Rhino_Command_Log_2025-11-11.txt
2025-11-11 21:03:20 1 block instance added to selection.
2025-11-11 21:03:23 Command: Isolate
2025-11-11 21:03:23 4095 block instances, 1 polysurface added to selection.
2025-11-11 21:03:27 Command: SoftTransform
2025-11-11 21:03:34 1 block instance added to selection.
2025-11-11 21:03:35 Command: ZS
2025-11-11 21:03:35 Command: '_Zoom
2025-11-11 21:03:35 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:03:37 Command: Isolate
2025-11-11 21:03:37 4 polysurfaces added to selection.
2025-11-11 21:21:58 Successfully read file "/Users/tianrunli/Desktop/Information Richness/Information Richness Installation.3dm"
2025-11-11 21:22:05 1 open surface added to selection.
2025-11-11 21:22:08 Command: '_CopyToClipboard
2025-11-11 21:22:11 Successfully read file "/Users/tianrunli/Desktop/Information Richness/Information Richness Project.3dm"
2025-11-11 21:22:11 512 block instances added to selection.
2025-11-11 21:22:11 Command: _Copy
2025-11-11 21:22:11 2 edges, 3 surfaces added to selection.
2025-11-11 21:22:11 4 edges, 1 surface, 4 vertices added to selection.
2025-11-11 21:22:11 Command: M
2025-11-11 21:22:11 Command: _Move
2025-11-11 21:22:11 1 surface added to selection.
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Command: _Delete
2025-11-11 21:22:11 Deleted 1 object.
2025-11-11 21:22:11 Processing light table
2025-11-11 21:22:11 Processing geometry table
2025-11-11 21:22:11 Render setup failed:Cancel
2025-11-11 21:22:11 1 surface added to selection.
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Undoing GumballTransform
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Deleted 1 object.
2025-11-11 21:22:11 Processing light table
2025-11-11 21:22:11 Processing geometry table
2025-11-11 21:22:11 Rendering time: 0d 0h 20m 21s
2025-11-11 21:22:11 1024 block instances added to selection.
2025-11-11 21:22:11 Command: _Delete
2025-11-11 21:22:11 Deleted 1024 objects.
2025-11-11 21:22:11 1 edge added to selection.
2025-11-11 21:22:11 Undoing Delete
2025-11-11 21:22:11 4 edges, 1 surface, 4 vertices added to selection.
2025-11-11 21:22:11 Command: M
2025-11-11 21:22:11 Command: _Move
2025-11-11 21:22:11 1024 block instances added to selection.
2025-11-11 21:22:11 Command: _Delete
2025-11-11 21:22:11 Deleted 1024 objects.
2025-11-11 21:22:11 40 block instances added to selection.
2025-11-11 21:22:11 Block Editing part "Light"
2025-11-11 21:22:11 3 polysurfaces, 5 extrusions added to selection.
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Command: '_SetDisplayMode
2025-11-11 21:22:11 Select a display mode ( Viewport=Active Mode=Shaded )_Wireframe
2025-11-11 21:22:11 Display mode set to "Wireframe".
2025-11-11 21:22:11 8 surfaces, 18 edges, 12 vertices added to selection.
2025-11-11 21:22:11 1 edge, 2 vertices removed from selection.
2025-11-11 21:22:11 21 edges, 8 surfaces, 18 vertices added to selection.
2025-11-11 21:22:11 4 edges, 8 vertices removed from selection.
2025-11-11 21:22:11 Undoing GumballTransform
2025-11-11 21:22:11 Command: _Scale1D
2025-11-11 21:22:11 Undoing Block edit
2025-11-11 21:22:11 Undoing Layer - change visibility
2025-11-11 21:22:11 Undoing Delete
2025-11-11 21:22:11 Undoing Move
2025-11-11 21:22:11 Command: _-ScriptEditor
2025-11-11 21:22:11 Select Option ( Edit Run Open )E
2025-11-11 21:22:11 Log file for today will be: /Users/tianrunli/Desktop/Rhino_Command_Log_2025-11-11.txt
2025-11-11 21:22:11 1 block instance added to selection.
2025-11-11 21:22:11 Command: Isolate
2025-11-11 21:22:11 4095 block instances, 1 polysurface added to selection.
2025-11-11 21:22:11 Command: SoftTransform
2025-11-11 21:22:11 1 block instance added to selection.
2025-11-11 21:22:11 Command: ZS
2025-11-11 21:22:11 Command: '_Zoom
2025-11-11 21:22:11 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:11 Command: Isolate
2025-11-11 21:22:11 4 polysurfaces added to selection.
2025-11-11 21:22:12 Command: '_Paste
2025-11-11 21:22:14 Command: _Drag
2025-11-11 21:22:20 Command: ZS
2025-11-11 21:22:20 Command: '_Zoom
2025-11-11 21:22:20 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:22:30 Command: Distance
2025-11-11 21:22:33 CPlane angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:22:33 World angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:22:33 Distance = 381.000 millimeters
2025-11-11 21:22:37 Command: Distance
2025-11-11 21:22:45 CPlane angles and deltas: xy = 180.000 elevation = 0.000 dx = -609.600 dy = 0.000 dz = 0.000
2025-11-11 21:22:45 World angles and deltas: xy = 180.000 elevation = 0.000 dx = -609.600 dy = 0.000 dz = 0.000
2025-11-11 21:22:45 Distance = 24.000 inches
2025-11-11 21:22:46 Command: Distance
2025-11-11 21:22:47 CPlane angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:22:47 World angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:22:47 Distance = 15.000 inches
2025-11-11 21:22:50 1 open surface added to selection.
2025-11-11 21:22:52 Command: _Scale
2025-11-11 21:22:55 1 edge added to selection.
2025-11-11 21:23:02 Command: _Drag
2025-11-11 21:23:04 Command: _Join
2025-11-11 21:23:04 Joining curves.
2025-11-11 21:23:04 4 curves joined into one closed curve.
2025-11-11 21:23:05 Command: _Drag
2025-11-11 21:23:08 Command: Offset
2025-11-11 21:23:13 Curve offset into one closed curve.
2025-11-11 21:28:03 Command: _-Picture
2025-11-11 21:28:03 Name of the bitmap file to open ( Browse )"/Users/tianrunli/Desktop/41BCMMBMTDL._AC_SL1000_.jpg"
2025-11-11 21:28:11 1 open surface added to selection.
2025-11-11 21:28:18 Command: _-Picture
2025-11-11 21:28:18 Name of the bitmap file to open ( Browse )"/Users/tianrunli/Desktop/61VJQv5oxlL._AC_SL1000_.jpg"
2025-11-11 21:28:26 1 open surface added to selection.
2025-11-11 21:28:52 2 curves, 1 surface added to selection.
2025-11-11 21:28:53 Command: M
2025-11-11 21:28:53 Command: _Move
2025-11-11 21:28:56 1 open surface added to selection.
2025-11-11 21:28:58 Command: _Scale1D
2025-11-11 21:29:10 Command: _Scale
2025-11-11 21:29:23 Command: _Drag
2025-11-11 21:29:25 2 curves, 1 picture surface, 1 surface added to selection.
2025-11-11 21:29:27 1 open surface added to selection.
2025-11-11 21:29:48 Command: _Drag
2025-11-11 21:29:52 2 curves, 1 surface added to selection.
2025-11-11 21:29:57 Command: _Drag
2025-11-11 21:30:08 1 open surface added to selection.
2025-11-11 21:30:10 Command: _Scale
2025-11-11 21:30:24 Command: _Drag
2025-11-11 21:30:39 1 open surface added to selection.
2025-11-11 21:30:39 Command: _Drag
2025-11-11 21:30:43 Command: _Scale1D
2025-11-11 21:30:58 1 open surface added to selection.
2025-11-11 21:31:00 Command: _Lock
2025-11-11 21:31:05 1 closed curve added to selection.
2025-11-11 21:31:06 Command: _Delete
2025-11-11 21:31:06 Deleted 1 object.
2025-11-11 21:31:07 1 curve, 1 surface added to selection.
2025-11-11 21:31:11 Command: Offset
2025-11-11 21:31:58 Curve offset into one closed curve.
2025-11-11 21:32:02 1 curve segment added to selection.
2025-11-11 21:32:06 Command: _Drag
2025-11-11 21:32:12 1 edge added to selection.
2025-11-11 21:32:14 Command: _Drag
2025-11-11 21:32:22 1 curve segment added to selection.
2025-11-11 21:32:23 Command: _Drag
2025-11-11 21:32:47 Command: _Delete
2025-11-11 21:32:47 Deleted 1 object.
2025-11-11 21:32:52 Undoing Delete
2025-11-11 21:32:53 Undoing Gumball move
2025-11-11 21:32:55 1 open surface added to selection.
2025-11-11 21:32:57 Command: _Scale1D
2025-11-11 21:33:11 Command: _UnlockSelected
2025-11-11 21:33:18 1 open surface added to selection.
2025-11-11 21:33:18 Command: _Delete
2025-11-11 21:33:18 Deleted 1 object.
2025-11-11 21:33:21 1 open surface added to selection.
2025-11-11 21:33:21 Command: _Delete
2025-11-11 21:33:21 Deleted 1 object.
2025-11-11 21:33:33 1 closed curve added to selection.
2025-11-11 21:33:34 Command: _Delete
2025-11-11 21:33:34 Deleted 1 object.
2025-11-11 21:33:35 1 closed curve added to selection.
2025-11-11 21:33:37 Command: Offset
2025-11-11 21:33:41 Curve offset into one closed curve.
2025-11-11 21:33:46 Command: Fillet
2025-11-11 21:34:02 1 closed curve added to selection.
2025-11-11 21:34:04 1 curve segment added to selection.
2025-11-11 21:35:05 2 curves added to selection.
2025-11-11 21:35:10 1 open surface added to selection.
2025-11-11 21:35:11 Command: _Delete
2025-11-11 21:35:11 Deleted 1 object.
2025-11-11 21:35:14 2 curves added to selection.
2025-11-11 21:35:17 Command: ExtrudeCrv
2025-11-11 21:35:31 Undoing ExtrudeCrv
2025-11-11 21:35:32 2 curves added to selection.
2025-11-11 21:35:32 Command: ExtrudeCrv
2025-11-11 21:45:38 1 edge added to selection.
2025-11-11 21:46:05 1 closed curve added to selection.
2025-11-11 21:46:11 Command: ExtrudeCrv
2025-11-11 21:46:37 Successfully read file "/Users/tianrunli/Desktop/Information Richness/Information Richness Installation.3dm"
2025-11-11 21:46:41 1 block instance added to selection.
2025-11-11 21:46:43 1 block member added to selection.
2025-11-11 21:46:47 1 block instance added to selection.
2025-11-11 21:46:48 Block Editing part "MacBook"
2025-11-11 21:46:51 Command: Distance
2025-11-11 21:46:54 CPlane angles and deltas: xy = -90.000 elevation = 10.000 dx = -0.000 dy = -0.246 dz = 0.043
2025-11-11 21:46:54 World angles and deltas: xy = -90.000 elevation = 10.000 dx = -0.000 dy = -0.246 dz = 0.043
2025-11-11 21:46:54 Distance = 0.010 inches
2025-11-11 21:46:59 Successfully read file "/Users/tianrunli/Desktop/Information Richness/Information Richness Project.3dm"
2025-11-11 21:46:59 512 block instances added to selection.
2025-11-11 21:46:59 Command: _Copy
2025-11-11 21:46:59 2 edges, 3 surfaces added to selection.
2025-11-11 21:46:59 4 edges, 1 surface, 4 vertices added to selection.
2025-11-11 21:46:59 Command: M
2025-11-11 21:46:59 Command: _Move
2025-11-11 21:46:59 1 surface added to selection.
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1 object.
2025-11-11 21:46:59 Processing light table
2025-11-11 21:46:59 Processing geometry table
2025-11-11 21:46:59 Render setup failed:Cancel
2025-11-11 21:46:59 1 surface added to selection.
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Undoing GumballTransform
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Deleted 1 object.
2025-11-11 21:46:59 Processing light table
2025-11-11 21:46:59 Processing geometry table
2025-11-11 21:46:59 Rendering time: 0d 0h 20m 21s
2025-11-11 21:46:59 1024 block instances added to selection.
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1024 objects.
2025-11-11 21:46:59 1 edge added to selection.
2025-11-11 21:46:59 Undoing Delete
2025-11-11 21:46:59 4 edges, 1 surface, 4 vertices added to selection.
2025-11-11 21:46:59 Command: M
2025-11-11 21:46:59 Command: _Move
2025-11-11 21:46:59 1024 block instances added to selection.
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1024 objects.
2025-11-11 21:46:59 40 block instances added to selection.
2025-11-11 21:46:59 Block Editing part "Light"
2025-11-11 21:46:59 3 polysurfaces, 5 extrusions added to selection.
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Command: '_SetDisplayMode
2025-11-11 21:46:59 Select a display mode ( Viewport=Active Mode=Shaded )_Wireframe
2025-11-11 21:46:59 Display mode set to "Wireframe".
2025-11-11 21:46:59 8 surfaces, 18 edges, 12 vertices added to selection.
2025-11-11 21:46:59 1 edge, 2 vertices removed from selection.
2025-11-11 21:46:59 21 edges, 8 surfaces, 18 vertices added to selection.
2025-11-11 21:46:59 4 edges, 8 vertices removed from selection.
2025-11-11 21:46:59 Undoing GumballTransform
2025-11-11 21:46:59 Command: _Scale1D
2025-11-11 21:46:59 Undoing Block edit
2025-11-11 21:46:59 Undoing Layer - change visibility
2025-11-11 21:46:59 Undoing Delete
2025-11-11 21:46:59 Undoing Move
2025-11-11 21:46:59 Command: _-ScriptEditor
2025-11-11 21:46:59 Select Option ( Edit Run Open )E
2025-11-11 21:46:59 Log file for today will be: /Users/tianrunli/Desktop/Rhino_Command_Log_2025-11-11.txt
2025-11-11 21:46:59 1 block instance added to selection.
2025-11-11 21:46:59 Command: Isolate
2025-11-11 21:46:59 4095 block instances, 1 polysurface added to selection.
2025-11-11 21:46:59 Command: SoftTransform
2025-11-11 21:46:59 1 block instance added to selection.
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Command: Isolate
2025-11-11 21:46:59 4 polysurfaces added to selection.
2025-11-11 21:46:59 Command: '_Paste
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 Command: ZS
2025-11-11 21:46:59 Command: '_Zoom
2025-11-11 21:46:59 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:46:59 Command: Distance
2025-11-11 21:46:59 CPlane angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:46:59 World angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:46:59 Distance = 381.000 millimeters
2025-11-11 21:46:59 Command: Distance
2025-11-11 21:46:59 CPlane angles and deltas: xy = 180.000 elevation = 0.000 dx = -609.600 dy = 0.000 dz = 0.000
2025-11-11 21:46:59 World angles and deltas: xy = 180.000 elevation = 0.000 dx = -609.600 dy = 0.000 dz = 0.000
2025-11-11 21:46:59 Distance = 24.000 inches
2025-11-11 21:46:59 Command: Distance
2025-11-11 21:46:59 CPlane angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:46:59 World angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:46:59 Distance = 15.000 inches
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Scale
2025-11-11 21:46:59 1 edge added to selection.
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 Command: _Join
2025-11-11 21:46:59 Joining curves.
2025-11-11 21:46:59 4 curves joined into one closed curve.
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 Command: Offset
2025-11-11 21:46:59 Curve offset into one closed curve.
2025-11-11 21:46:59 Command: _-Picture
2025-11-11 21:46:59 Name of the bitmap file to open ( Browse )"/Users/tianrunli/Desktop/41BCMMBMTDL._AC_SL1000_.jpg"
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _-Picture
2025-11-11 21:46:59 Name of the bitmap file to open ( Browse )"/Users/tianrunli/Desktop/61VJQv5oxlL._AC_SL1000_.jpg"
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 2 curves, 1 surface added to selection.
2025-11-11 21:46:59 Command: M
2025-11-11 21:46:59 Command: _Move
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Scale1D
2025-11-11 21:46:59 Command: _Scale
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 2 curves, 1 picture surface, 1 surface added to selection.
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 2 curves, 1 surface added to selection.
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Scale
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 Command: _Scale1D
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Lock
2025-11-11 21:46:59 1 closed curve added to selection.
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1 object.
2025-11-11 21:46:59 1 curve, 1 surface added to selection.
2025-11-11 21:46:59 Command: Offset
2025-11-11 21:46:59 Curve offset into one closed curve.
2025-11-11 21:46:59 1 curve segment added to selection.
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 1 edge added to selection.
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 1 curve segment added to selection.
2025-11-11 21:46:59 Command: _Drag
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1 object.
2025-11-11 21:46:59 Undoing Delete
2025-11-11 21:46:59 Undoing Gumball move
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Scale1D
2025-11-11 21:46:59 Command: _UnlockSelected
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1 object.
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1 object.
2025-11-11 21:46:59 1 closed curve added to selection.
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1 object.
2025-11-11 21:46:59 1 closed curve added to selection.
2025-11-11 21:46:59 Command: Offset
2025-11-11 21:46:59 Curve offset into one closed curve.
2025-11-11 21:46:59 Command: Fillet
2025-11-11 21:46:59 1 closed curve added to selection.
2025-11-11 21:46:59 1 curve segment added to selection.
2025-11-11 21:46:59 2 curves added to selection.
2025-11-11 21:46:59 1 open surface added to selection.
2025-11-11 21:46:59 Command: _Delete
2025-11-11 21:46:59 Deleted 1 object.
2025-11-11 21:46:59 2 curves added to selection.
2025-11-11 21:46:59 Command: ExtrudeCrv
2025-11-11 21:46:59 Undoing ExtrudeCrv
2025-11-11 21:46:59 2 curves added to selection.
2025-11-11 21:46:59 Command: ExtrudeCrv
2025-11-11 21:46:59 1 edge added to selection.
2025-11-11 21:46:59 1 closed curve added to selection.
2025-11-11 21:46:59 Command: ExtrudeCrv
2025-11-11 21:47:02 Undoing ExtrudeCrv
2025-11-11 21:47:04 Command: ExtrudeCrv
2025-11-11 21:47:17 Command: ZS
2025-11-11 21:47:17 Command: '_Zoom
2025-11-11 21:47:18 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:20 1 closed extrusion added to selection.
2025-11-11 21:47:39 Undoing GumballTransform
2025-11-11 21:47:39 1 closed extrusion added to selection.
2025-11-11 21:47:52 Successfully read file "/Users/tianrunli/Desktop/Information Richness/Information Richness Installation.3dm"
2025-11-11 21:47:52 1 block instance added to selection.
2025-11-11 21:47:52 1 block member added to selection.
2025-11-11 21:47:52 1 block instance added to selection.
2025-11-11 21:47:52 Block Editing part "MacBook"
2025-11-11 21:47:52 Command: Distance
2025-11-11 21:47:52 CPlane angles and deltas: xy = -90.000 elevation = 10.000 dx = -0.000 dy = -0.246 dz = 0.043
2025-11-11 21:47:52 World angles and deltas: xy = -90.000 elevation = 10.000 dx = -0.000 dy = -0.246 dz = 0.043
2025-11-11 21:47:52 Distance = 0.010 inches
2025-11-11 21:47:55 1 block instance added to selection.
2025-11-11 21:47:56 Command: '_CopyToClipboard
2025-11-11 21:47:58 Successfully read file "/Users/tianrunli/Desktop/Information Richness/Information Richness Project.3dm"
2025-11-11 21:47:58 512 block instances added to selection.
2025-11-11 21:47:58 Command: _Copy
2025-11-11 21:47:58 2 edges, 3 surfaces added to selection.
2025-11-11 21:47:58 4 edges, 1 surface, 4 vertices added to selection.
2025-11-11 21:47:58 Command: M
2025-11-11 21:47:58 Command: _Move
2025-11-11 21:47:58 1 surface added to selection.
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1 object.
2025-11-11 21:47:58 Processing light table
2025-11-11 21:47:58 Processing geometry table
2025-11-11 21:47:58 Render setup failed:Cancel
2025-11-11 21:47:58 1 surface added to selection.
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Undoing GumballTransform
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Deleted 1 object.
2025-11-11 21:47:58 Processing light table
2025-11-11 21:47:58 Processing geometry table
2025-11-11 21:47:58 Rendering time: 0d 0h 20m 21s
2025-11-11 21:47:58 1024 block instances added to selection.
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1024 objects.
2025-11-11 21:47:58 1 edge added to selection.
2025-11-11 21:47:58 Undoing Delete
2025-11-11 21:47:58 4 edges, 1 surface, 4 vertices added to selection.
2025-11-11 21:47:58 Command: M
2025-11-11 21:47:58 Command: _Move
2025-11-11 21:47:58 1024 block instances added to selection.
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1024 objects.
2025-11-11 21:47:58 40 block instances added to selection.
2025-11-11 21:47:58 Block Editing part "Light"
2025-11-11 21:47:58 3 polysurfaces, 5 extrusions added to selection.
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Command: '_SetDisplayMode
2025-11-11 21:47:58 Select a display mode ( Viewport=Active Mode=Shaded )_Wireframe
2025-11-11 21:47:58 Display mode set to "Wireframe".
2025-11-11 21:47:58 8 surfaces, 18 edges, 12 vertices added to selection.
2025-11-11 21:47:58 1 edge, 2 vertices removed from selection.
2025-11-11 21:47:58 21 edges, 8 surfaces, 18 vertices added to selection.
2025-11-11 21:47:58 4 edges, 8 vertices removed from selection.
2025-11-11 21:47:58 Undoing GumballTransform
2025-11-11 21:47:58 Command: _Scale1D
2025-11-11 21:47:58 Undoing Block edit
2025-11-11 21:47:58 Undoing Layer - change visibility
2025-11-11 21:47:58 Undoing Delete
2025-11-11 21:47:58 Undoing Move
2025-11-11 21:47:58 Command: _-ScriptEditor
2025-11-11 21:47:58 Select Option ( Edit Run Open )E
2025-11-11 21:47:58 Log file for today will be: /Users/tianrunli/Desktop/Rhino_Command_Log_2025-11-11.txt
2025-11-11 21:47:58 1 block instance added to selection.
2025-11-11 21:47:58 Command: Isolate
2025-11-11 21:47:58 4095 block instances, 1 polysurface added to selection.
2025-11-11 21:47:58 Command: SoftTransform
2025-11-11 21:47:58 1 block instance added to selection.
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Command: Isolate
2025-11-11 21:47:58 4 polysurfaces added to selection.
2025-11-11 21:47:58 Command: '_Paste
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 Command: Distance
2025-11-11 21:47:58 CPlane angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:47:58 World angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:47:58 Distance = 381.000 millimeters
2025-11-11 21:47:58 Command: Distance
2025-11-11 21:47:58 CPlane angles and deltas: xy = 180.000 elevation = 0.000 dx = -609.600 dy = 0.000 dz = 0.000
2025-11-11 21:47:58 World angles and deltas: xy = 180.000 elevation = 0.000 dx = -609.600 dy = 0.000 dz = 0.000
2025-11-11 21:47:58 Distance = 24.000 inches
2025-11-11 21:47:58 Command: Distance
2025-11-11 21:47:58 CPlane angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:47:58 World angles and deltas: xy = 0.000 elevation = -90.000 dx = 0.000 dy = 0.000 dz = -381.000
2025-11-11 21:47:58 Distance = 15.000 inches
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Scale
2025-11-11 21:47:58 1 edge added to selection.
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 Command: _Join
2025-11-11 21:47:58 Joining curves.
2025-11-11 21:47:58 4 curves joined into one closed curve.
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 Command: Offset
2025-11-11 21:47:58 Curve offset into one closed curve.
2025-11-11 21:47:58 Command: _-Picture
2025-11-11 21:47:58 Name of the bitmap file to open ( Browse )"/Users/tianrunli/Desktop/41BCMMBMTDL._AC_SL1000_.jpg"
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _-Picture
2025-11-11 21:47:58 Name of the bitmap file to open ( Browse )"/Users/tianrunli/Desktop/61VJQv5oxlL._AC_SL1000_.jpg"
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 2 curves, 1 surface added to selection.
2025-11-11 21:47:58 Command: M
2025-11-11 21:47:58 Command: _Move
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Scale1D
2025-11-11 21:47:58 Command: _Scale
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 2 curves, 1 picture surface, 1 surface added to selection.
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 2 curves, 1 surface added to selection.
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Scale
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 Command: _Scale1D
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Lock
2025-11-11 21:47:58 1 closed curve added to selection.
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1 object.
2025-11-11 21:47:58 1 curve, 1 surface added to selection.
2025-11-11 21:47:58 Command: Offset
2025-11-11 21:47:58 Curve offset into one closed curve.
2025-11-11 21:47:58 1 curve segment added to selection.
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 1 edge added to selection.
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 1 curve segment added to selection.
2025-11-11 21:47:58 Command: _Drag
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1 object.
2025-11-11 21:47:58 Undoing Delete
2025-11-11 21:47:58 Undoing Gumball move
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Scale1D
2025-11-11 21:47:58 Command: _UnlockSelected
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1 object.
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1 object.
2025-11-11 21:47:58 1 closed curve added to selection.
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1 object.
2025-11-11 21:47:58 1 closed curve added to selection.
2025-11-11 21:47:58 Command: Offset
2025-11-11 21:47:58 Curve offset into one closed curve.
2025-11-11 21:47:58 Command: Fillet
2025-11-11 21:47:58 1 closed curve added to selection.
2025-11-11 21:47:58 1 curve segment added to selection.
2025-11-11 21:47:58 2 curves added to selection.
2025-11-11 21:47:58 1 open surface added to selection.
2025-11-11 21:47:58 Command: _Delete
2025-11-11 21:47:58 Deleted 1 object.
2025-11-11 21:47:58 2 curves added to selection.
2025-11-11 21:47:58 Command: ExtrudeCrv
2025-11-11 21:47:58 Undoing ExtrudeCrv
2025-11-11 21:47:58 2 curves added to selection.
2025-11-11 21:47:58 Command: ExtrudeCrv
2025-11-11 21:47:58 1 edge added to selection.
2025-11-11 21:47:58 1 closed curve added to selection.
2025-11-11 21:47:58 Command: ExtrudeCrv
2025-11-11 21:47:58 Undoing ExtrudeCrv
2025-11-11 21:47:58 Command: ExtrudeCrv
2025-11-11 21:47:58 Command: ZS
2025-11-11 21:47:58 Command: '_Zoom
2025-11-11 21:47:58 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:47:58 1 closed extrusion added to selection.
2025-11-11 21:47:58 Undoing GumballTransform
2025-11-11 21:47:58 1 closed extrusion added to selection.
2025-11-11 21:48:00 Command: '_Paste
2025-11-11 21:48:03 Command: _Drag
2025-11-11 21:48:06 1 block instance added to selection.
2025-11-11 21:48:08 Undoing Gumball move
2025-11-11 21:48:09 Undoing Paste
2025-11-11 21:48:10 Undoing Layer - rename layer
2025-11-11 21:48:11 Undoing Layer - new
2025-11-11 21:48:15 Command: '_Paste
2025-11-11 21:48:25 Command: _Drag
2025-11-11 21:48:50 1 block instance added to selection.
2025-11-11 21:48:51 1 block member added to selection.
2025-11-11 21:48:52 1 block instance added to selection.
2025-11-11 21:48:52 Block Editing part "MacBook"
2025-11-11 21:48:53 1 closed extrusion added to selection.
2025-11-11 21:48:56 Command: _ChangeToCurrentLayer
2025-11-11 21:49:01 Undoing Block edit
2025-11-11 21:49:02 Undoing Layer - change color
2025-11-11 21:49:11 1 block instance added to selection.
2025-11-11 21:49:11 Block Editing part "MacBook"
2025-11-11 21:49:19 1 closed extrusion added to selection.
2025-11-11 21:49:36 Command: _ChangeToCurrentLayer
2025-11-11 21:50:04 Command: _SubDPlane
2025-11-11 21:53:30 1 open SubD added to selection.
2025-11-11 21:53:34 Command: _ChangeToCurrentLayer
2025-11-11 21:53:41 Command: '_SubDDisplayToggle
2025-11-11 21:53:41 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 21:53:44 Command: ZS
2025-11-11 21:53:44 Command: '_Zoom
2025-11-11 21:53:44 Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 )_Selected
2025-11-11 21:53:46 Command: _Drag
2025-11-11 21:54:22 1 open SubD added to selection.
2025-11-11 21:54:24 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:54:26 Command: _Drag
2025-11-11 21:54:32 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:54:33 Command: _Drag
2025-11-11 21:54:41 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:54:45 Command: '_SetDisplayMode
2025-11-11 21:54:45 Select a display mode ( Viewport=Active Mode=Wireframe )_Shaded
2025-11-11 21:54:45 Display mode set to "Shaded".
2025-11-11 21:54:47 Command: _Drag
2025-11-11 21:54:52 Undoing Gumball move
2025-11-11 21:55:01 1 open SubD added to selection.
2025-11-11 21:55:02 Command: _Drag
2025-11-11 21:55:04 1 edge added to selection.
2025-11-11 21:55:22 1 open SubD added to selection.
2025-11-11 21:55:23 Command: _Drag
2025-11-11 21:55:32 Command: '_SetDisplayMode
2025-11-11 21:55:32 Select a display mode ( Viewport=Active Mode=Shaded )_Wireframe
2025-11-11 21:55:32 Display mode set to "Wireframe".
2025-11-11 21:55:43 Command: SelCrv
2025-11-11 21:55:43 2 curves added to selection.
2025-11-11 21:55:44 Command: _Delete
2025-11-11 21:55:44 Deleted 2 objects.
2025-11-11 21:55:46 1 open SubD added to selection.
2025-11-11 21:55:53 1 closed polysurface added to selection.
2025-11-11 21:55:55 1 open SubD added to selection.
2025-11-11 21:56:02 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:56:03 Command: _Drag
2025-11-11 21:56:10 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:56:11 Command: _Drag
2025-11-11 21:56:17 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:56:19 Command: _Drag
2025-11-11 21:56:25 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:56:26 Command: _Drag
2025-11-11 21:56:38 1 SubD face added to selection.
2025-11-11 21:56:52 1 open SubD added to selection.
2025-11-11 21:56:53 Command: _Drag
2025-11-11 21:57:00 1 SubD face added to selection.
2025-11-11 21:57:04 2 SubD vertices, 6 SubD edges, 2 SubD faces added to selection.
2025-11-11 21:57:16 Command: '_SubDDisplayToggle
2025-11-11 21:57:16 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 21:57:18 Command: '_SubDDisplayToggle
2025-11-11 21:57:18 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 21:57:19 1 SubD edge added to selection.
2025-11-11 21:57:32 1 SubD face added to selection.
2025-11-11 21:57:33 1 open SubD removed from selection.
2025-11-11 21:57:34 1 SubD edge added to selection.
2025-11-11 21:58:16 Command: _Drag
2025-11-11 21:58:20 Undoing Gumball scale
2025-11-11 21:58:22 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:58:27 Command: _Drag
2025-11-11 21:58:29 Undoing Gumball scale
2025-11-11 21:58:32 Undoing GumballTransform
2025-11-11 21:58:34 Redoing GumballTransform
2025-11-11 21:58:35 Command: '_SubDDisplayToggle
2025-11-11 21:58:35 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 21:58:38 Undoing GumballTransform
2025-11-11 21:58:43 Command: '_SubDDisplayToggle
2025-11-11 21:58:43 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 21:58:45 Command: '_SubDDisplayToggle
2025-11-11 21:58:45 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 21:58:55 1 open SubD added to selection.
2025-11-11 21:59:01 Command: ToNURBS
2025-11-11 21:59:02 1 object selected. 0 NURBS curves and 64 NURBS surfaces will be created.
2025-11-11 21:59:02 64 NURBS surfaces will be packed into 1 larger surface.
2025-11-11 21:59:03 Converting to NURBS...
2025-11-11 21:59:04 Command: _Delete
2025-11-11 21:59:04 Deleted 1 object.
2025-11-11 21:59:08 Undoing Delete
2025-11-11 21:59:10 Undoing ToNURBS
2025-11-11 21:59:11 Command: '_SubDDisplayToggle
2025-11-11 21:59:12 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 21:59:21 9 SubD vertices, 8 SubD edges added to selection.
2025-11-11 21:59:29 1 SubD edge added to selection.
2025-11-11 21:59:29 8 SubD edges added to selection.
2025-11-11 21:59:32 1 SubD edge added to selection.
2025-11-11 21:59:33 8 SubD edges added to selection.
2025-11-11 21:59:34 1 SubD vertex added to selection.
2025-11-11 21:59:35 1 SubD edge removed from selection.
2025-11-11 21:59:36 1 SubD vertex removed from selection.
2025-11-11 21:59:37 1 SubD edge removed from selection.
2025-11-11 21:59:41 1 SubD edge added to selection.
2025-11-11 21:59:41 8 SubD edges added to selection.
2025-11-11 21:59:42 1 SubD edge removed from selection.
2025-11-11 22:00:19 1 SubD edge added to selection.
2025-11-11 22:00:34 1 SubD face added to selection.
2025-11-11 22:00:40 1 open SubD added to selection.
2025-11-11 22:00:41 Command: '_SubDDisplayToggle
2025-11-11 22:00:41 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:00:44 Command: '_SubDDisplayToggle
2025-11-11 22:00:44 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 22:00:47 Command: '_SubDDisplayToggle
2025-11-11 22:00:47 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:00:50 1 SubD edge added to selection.
2025-11-11 22:00:51 8 SubD edges added to selection.
2025-11-11 22:00:56 Command: '_SubDDisplayToggle
2025-11-11 22:00:56 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 22:01:00 Command: ```
2025-11-11 22:01:00 Unknown command: ```
2025-11-11 22:01:03 1 open SubD added to selection.
2025-11-11 22:01:10 Command: '_SubDDisplayToggle
2025-11-11 22:01:10 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:01:19 Command: ToNURBS
2025-11-11 22:01:19 1 object selected. 0 NURBS curves and 64 NURBS surfaces will be created.
2025-11-11 22:01:19 64 NURBS surfaces will be packed into 1 larger surface.
2025-11-11 22:01:21 Converting to NURBS...
2025-11-11 22:01:23 Command: Hide
2025-11-11 22:01:24 1 open surface added to selection.
2025-11-11 22:01:28 Command: Cap
2025-11-11 22:01:28 Unable to cap one object. The openings did not have closed, planar loops of edges.
2025-11-11 22:01:31 1 edge added to selection.
2025-11-11 22:01:32 3 edges added to selection.
2025-11-11 22:01:34 Command: _Drag
2025-11-11 22:01:40 Command: Patch
2025-11-11 22:01:46 Deleted 4 objects.
2025-11-11 22:01:48 1 open surface added to selection.
2025-11-11 22:01:51 Undoing Delete
2025-11-11 22:01:57 Undoing Patch
2025-11-11 22:02:00 Command: ProjectToCPlane
2025-11-11 22:02:05 Command: _Drag
2025-11-11 22:02:12 Command: Patch
2025-11-11 22:02:15 Deleted 4 objects.
2025-11-11 22:02:16 2 surfaces added to selection.
2025-11-11 22:02:17 Command: _Join
2025-11-11 22:02:17 Unable to join surfaces or polysurfaces.
2025-11-11 22:02:19 2 surfaces added to selection.
2025-11-11 22:02:22 1 open surface added to selection.
2025-11-11 22:02:23 Command: _Join
2025-11-11 22:02:23 Unable to join surfaces or polysurfaces.
2025-11-11 22:02:24 1 open surface added to selection.
2025-11-11 22:02:37 Undoing Join
2025-11-11 22:02:38 Redoing Join
2025-11-11 22:02:39 1 open surface added to selection.
2025-11-11 22:02:41 Command: _Drag
2025-11-11 22:02:43 1 open surface added to selection.
2025-11-11 22:02:48 Command: ExtrudeSrf
2025-11-11 22:03:00 1 closed polysurface added to selection.
2025-11-11 22:03:01 Command: _BooleanDifference
2025-11-11 22:03:03 Boolean difference failed.
2025-11-11 22:03:04 1 closed polysurface added to selection.
2025-11-11 22:03:04 Command: _Delete
2025-11-11 22:03:04 Deleted 1 object.
2025-11-11 22:03:07 Undoing Delete
2025-11-11 22:03:09 1 open surface added to selection.
2025-11-11 22:03:15 Undoing GumballTransform
2025-11-11 22:03:17 Undoing BooleanDifference
2025-11-11 22:03:18 Undoing ExtrudeSrf
2025-11-11 22:03:18 Redoing ExtrudeSrf
2025-11-11 22:03:19 1 open surface added to selection.
2025-11-11 22:03:24 Undoing GumballTransform
2025-11-11 22:03:28 1 closed polysurface added to selection.
2025-11-11 22:03:29 Command: _BooleanDifference
2025-11-11 22:03:31 Command: _BooleanSplit
2025-11-11 22:03:33 1 closed polysurface added to selection.
2025-11-11 22:03:33 Command: _Delete
2025-11-11 22:03:33 Deleted 1 object.
2025-11-11 22:03:34 1 open surface added to selection.
2025-11-11 22:03:34 Command: _Delete
2025-11-11 22:03:34 Deleted 1 object.
2025-11-11 22:03:34 1 closed polysurface added to selection.
2025-11-11 22:03:46 Command: Align
2025-11-11 22:03:53 1 closed polysurface added to selection.
2025-11-11 22:03:54 Command: _BooleanUnion
2025-11-11 22:03:54 Objects do not intersect. Nothing done.
2025-11-11 22:04:01 Undoing Align
2025-11-11 22:04:05 Redoing Align
2025-11-11 22:04:10 Undoing Align
2025-11-11 22:04:14 1 surface added to selection.
2025-11-11 22:04:21 1 edge added to selection.
2025-11-11 22:04:21 7 edges added to selection.
2025-11-11 22:04:23 Command: _Drag
2025-11-11 22:04:24 Command: _Join
2025-11-11 22:04:24 Joining curves.
2025-11-11 22:04:24 8 curves joined into one closed curve.
2025-11-11 22:04:25 Command: _Drag
2025-11-11 22:04:28 Undoing Gumball extrude
2025-11-11 22:04:29 1 closed curve added to selection.
2025-11-11 22:04:33 Command: ExtrudeCrv
2025-11-11 22:04:40 1 closed polysurface added to selection.
2025-11-11 22:04:41 Command: _BooleanSplit
2025-11-11 22:04:43 1 closed polysurface removed from selection.
2025-11-11 22:04:44 Command: _Delete
2025-11-11 22:04:44 Deleted 4 objects.
2025-11-11 22:04:45 1 open extrusion added to selection.
2025-11-11 22:04:45 Command: _Delete
2025-11-11 22:04:45 Deleted 1 object.
2025-11-11 22:04:47 1 closed curve added to selection.
2025-11-11 22:04:48 Command: _Delete
2025-11-11 22:04:48 Deleted 1 object.
2025-11-11 22:04:48 1 closed polysurface added to selection.
2025-11-11 22:04:53 Command: Align
2025-11-11 22:04:58 1 closed polysurface added to selection.
2025-11-11 22:05:00 Command: _BooleanUnion
2025-11-11 22:05:05 1 open polysurface added to selection.
2025-11-11 22:05:12 Undoing BooleanUnion
2025-11-11 22:05:13 Undoing Align
2025-11-11 22:05:14 Undoing Delete
2025-11-11 22:05:17 Undoing BooleanSplit
2025-11-11 22:05:17 Undoing ExtrudeCrv
2025-11-11 22:05:18 Undoing Join
2025-11-11 22:05:23 1 closed polysurface added to selection.
2025-11-11 22:05:31 Undoing GumballTransform
2025-11-11 22:05:37 1 open curve added to selection.
2025-11-11 22:05:41 8 curves added to selection.
2025-11-11 22:05:42 Command: _Join
2025-11-11 22:05:42 Joining curves.
2025-11-11 22:05:42 8 curves joined into one closed curve.
2025-11-11 22:05:44 Command: ExtrudeCrv
2025-11-11 22:05:50 Undoing ExtrudeCrv
2025-11-11 22:05:51 Undoing Join
2025-11-11 22:05:52 Undoing GumballTransform
2025-11-11 22:05:53 Undoing Gumball move
2025-11-11 22:05:55 Redoing Gumball move
2025-11-11 22:05:57 1 closed polysurface added to selection.
2025-11-11 22:06:04 2 curves added to selection.
2025-11-11 22:06:07 8 curves added to selection.
2025-11-11 22:06:07 Command: _Join
2025-11-11 22:06:07 Joining curves.
2025-11-11 22:06:07 8 curves joined into one closed curve.
2025-11-11 22:06:10 Command: ExtrudeCrv
2025-11-11 22:06:12 1 closed polysurface added to selection.
2025-11-11 22:06:13 Command: _BooleanSplit
2025-11-11 22:06:15 1 closed polysurface removed from selection.
2025-11-11 22:06:16 Command: _Delete
2025-11-11 22:06:16 Deleted 1 object.
2025-11-11 22:06:17 1 open extrusion added to selection.
2025-11-11 22:06:17 Command: _Delete
2025-11-11 22:06:17 Deleted 1 object.
2025-11-11 22:06:19 1 closed curve added to selection.
2025-11-11 22:06:20 Command: _Delete
2025-11-11 22:06:20 Deleted 1 object.
2025-11-11 22:06:21 1 closed polysurface added to selection.
2025-11-11 22:06:26 Command: Align
2025-11-11 22:07:02 Undoing Align
2025-11-11 22:07:03 Undoing Delete
2025-11-11 22:07:04 Undoing BooleanSplit
2025-11-11 22:07:04 Undoing ExtrudeCrv
2025-11-11 22:07:04 Undoing Join
2025-11-11 22:07:05 Undoing GumballTransform
2025-11-11 22:07:05 Undoing Gumball move
2025-11-11 22:07:06 Undoing Delete
2025-11-11 22:07:08 Undoing BooleanSplit
2025-11-11 22:07:08 Undoing GumballTransform
2025-11-11 22:07:09 Undoing ExtrudeSrf
2025-11-11 22:07:09 Undoing Gumball scale
2025-11-11 22:07:10 Undoing Join
2025-11-11 22:07:11 Undoing Delete
2025-11-11 22:07:12 Undoing Patch
2025-11-11 22:07:14 Undoing Gumball move
2025-11-11 22:07:15 1 open surface added to selection.
2025-11-11 22:07:16 Command: _Delete
2025-11-11 22:07:16 Deleted 1 object.
2025-11-11 22:07:16 Command: Show
2025-11-11 22:07:16 Showing 4102 hidden objects.
2025-11-11 22:07:19 1 block instance added to selection.
2025-11-11 22:07:26 1 SubD, 1 polysurface, 2 extrusions added to selection.
2025-11-11 22:07:27 Command: Isolate
2025-11-11 22:07:27 4095 block instances, 4 curves, 1 polysurface added to selection.
2025-11-11 22:07:31 Command: '_SetDisplayMode
2025-11-11 22:07:31 Select a display mode ( Viewport=Active Mode=Shaded )_Shaded
2025-11-11 22:07:31 Display mode set to "Shaded".
2025-11-11 22:07:32 Command: '_SubDDisplayToggle
2025-11-11 22:07:32 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 22:07:34 1 SubD face added to selection.
2025-11-11 22:07:34 1 SubD face
2025-11-11 22:07:35 added to selection.
2025-11-11 22:07:35 1 SubD face added to selection.
2025-11-11 22:07:40 1 SubD edge added to selection.
2025-11-11 22:08:02 1 SubD vertex added to selection.
2025-11-11 22:08:05 1 SubD edge added to selection.
2025-11-11 22:08:31 Undoing GumballTransform
2025-11-11 22:08:47 Command: '_SubDDisplayToggle
2025-11-11 22:08:47 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:08:53 Command: '_SubDDisplayToggle
2025-11-11 22:08:53 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 22:08:56 1 SubD edge added to selection.
2025-11-11 22:09:07 Undoing GumballTransform
2025-11-11 22:09:17 1 SubD edge added to selection.
2025-11-11 22:09:18 8 SubD edges added to selection.
2025-11-11 22:09:19 Command: _Drag
2025-11-11 22:09:22 Undoing Gumball move
2025-11-11 22:09:30 Command: '_SubDDisplayToggle
2025-11-11 22:09:30 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:09:33 Undoing GumballTransform
2025-11-11 22:09:35 Command: '_SubDDisplayToggle
2025-11-11 22:09:35 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 22:09:37 1 SubD edge added to selection.
2025-11-11 22:09:37 8 SubD edges added to selection.
2025-11-11 22:09:38 Command: _Delete
2025-11-11 22:09:38 Deleted or dissolved 8 sub-objects.
2025-11-11 22:09:40 Command: '_SubDDisplayToggle
2025-11-11 22:09:40 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:10:03 Command: '_SubDDisplayToggle
2025-11-11 22:10:03 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 22:10:09 1 SubD edge added to selection.
2025-11-11 22:10:17 Command: '_SubDDisplayToggle
2025-11-11 22:10:17 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:10:20 Undoing GumballTransform
2025-11-11 22:10:21 Command: '_SubDDisplayToggle
2025-11-11 22:10:21 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 22:10:22 Command: '_SubDDisplayToggle
2025-11-11 22:10:22 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:10:27 Command: '_SubDDisplayToggle
2025-11-11 22:10:27 SubD display changed from smooth to flat. 1 SubD changed.
2025-11-11 22:10:31 1 SubD vertex added to selection.
2025-11-11 22:10:39 Command: '_SubDDisplayToggle
2025-11-11 22:10:39 SubD display changed from flat to smooth. 1 SubD changed.
2025-11-11 22:10:43 1 open SubD added to selection.
2025-11-11 22:10:51 Command: ToNURBS
2025-11-11 22:10:51 1 object selected. 0 NURBS curves and 56 NURBS surfaces will be created.
2025-11-11 22:10:51 56 NURBS surfaces will be packed into 1 larger surface.
2025-11-11 22:10:53 Converting to NURBS...
2025-11-11 22:10:54 Command: Hide
2025-11-11 22:10:55 1 open surface added to selection.
2025-11-11 22:11:02 Undoing GumballTransform
2025-11-11 22:11:02 Redoing GumballTransform
2025-11-11 22:11:04 1 open surface added to selection.
2025-11-11 22:11:07 Command: ExtrudeCrv
2025-11-11 22:11:07 1 open surface added to selection.
2025-11-11 22:12:17 Command: ExtrudeSrf
2025-11-11 22:12:29 1 edge added to selection.
2025-11-11 22:12:29 7 edges added to selection.
2025-11-11 22:12:30 Command: _Drag
2025-11-11 22:12:31 Command: _Join
2025-11-11 22:12:31 Joining curves.
2025-11-11 22:12:31 8 curves joined into one closed curve.
2025-11-11 22:12:33 Command: _Drag
2025-11-11 22:12:35 Undoing Gumball extrude
2025-11-11 22:12:36 1 closed curve added to selection.
2025-11-11 22:12:37 Command: _Drag
2025-11-11 22:12:40 Undoing Gumball move
2025-11-11 22:12:42 Command: ExtrudeCrv
2025-11-11 22:12:45 1 closed polysurface added to selection.
2025-11-11 22:12:47 Command: _BooleanSplit
2025-11-11 22:12:50 1 closed polysurface removed from selection.
2025-11-11 22:12:51 Command: _Delete
2025-11-11 22:12:51 Deleted 1 object.
2025-11-11 22:12:52 1 open extrusion added to selection.
2025-11-11 22:12:52 Command: _Delete
2025-11-11 22:12:52 Deleted 1 object.
2025-11-11 22:12:56 1 closed curve added to selection.
2025-11-11 22:12:58 Command: Patch
2025-11-11 22:13:00 Deleted 1 object.
2025-11-11 22:13:02 1 open surface added to selection.
2025-11-11 22:13:04 Command: _Drag
2025-11-11 22:13:19 1 closed polysurface added to selection.
2025-11-11 22:13:19 Command: _BooleanSplit
2025-11-11 22:13:22 1 closed polysurface added to selection.
2025-11-11 22:13:22 Command: _Delete
2025-11-11 22:13:22 Deleted 1 object.
2025-11-11 22:13:23 1 open surface added to selection.
2025-11-11 22:13:23 Command: _Delete
2025-11-11 22:13:23 Deleted 1 object.
2025-11-11 22:13:23 1 closed polysurface added to selection.
2025-11-11 22:13:25 Command: Align
2025-11-11 22:13:32 2 polysurfaces added to selection.
2025-11-11 22:13:33 Command: _BooleanUnion